Legomont Alu Slot Drain aluminum slot channel and recessed cover for drainage of terraces, balconies, swimming pools, etc. is made of extruded aluminum profile that is anodized and corrosion resistant.
This channel is used wherever we want to have high-efficiency drainage from the drainage surface, which at the same time is not too striking and does not disturb the appearance of any terrace, balcony, pool environment, etc ..
Legomont Alu Slot Drain aluminum slot channel is produced in dimensions of 500 and 1000 mm with or without audit cover for cleaning the inside of the channel. By combining elements of 500 and 1000 mm with the connector we can stack drainage lines according to the requirement of line drainage of the building with horizontal drains DN50 at the ends of the channel or vertical drains DN 75 that are placed anywhere on the channel with pre-drilling holes in the drain position. If Legomont Alu Slot Drain aluminum slot channel is installed on terraces, that is, on surfaces that must be watertight, then such surfaces must be hydroizolated and these channels are placed on them. In addition to the mentioned elements of the Legomont Alu Slot Drain aluminum channel, we also have closed end pieces for the ends of the channel. The installation height of Legomont Alu Slot Drain aluminum channels is 80 mm, all elements are made of aluminum.
We believe, after watching 3D video presentation, everything will be clear for you.
The specification of all available elements of the Legomont Alu Slot Drain aluminum channel you can look below.
– AL channel 1 meter long
– AL channel 0.5 meters long
– 1 meter long AL channel with inspection cover for cleaning
– 0.5 meter long AL channel with inspection cover for cleaning
-Closed end pieces left
-Closed end pieces right
– AL channel end pieces Left with horizontal drain DN 50
– AL channel end pieces Right with horizontal drain DN 50
– AL element for connection to vertical drain DN 75
– AL channel connector
For more information, please contact us by e-mail: legomont@legomont.hr or phone +385 21 533 176
-
- AL CHANNEL L= 1m OR 0,5 m
-
- AL CHANNEL L=1m ili 0,5 m with inspection cover for cleaning
-
- Closed end pieces left
-
- Closed end pieces right
-
- AL channel end pieces Left with horizontal drain DN 50
-
- AL channel end pieces Right with horizontal drain DN 50
-
- AL channel connector
-
- AL element for connection to vertical drain DN 75
